Send Email

0804604928985% Response Rate

Home » Products & Services » FRP Degasifiers

FRP Degasifiers

Degasifiers Remove dissolved gases and other contaminants for high purity water. Some industrial applications and processes require ultra pure water with extremely low levels of dissolved gases and other contaminants. Degasification / decarbonation increase the life of the process equipment by preventing or controlling corrosion.
Degasifiers working Principle:
The basic principle of degasification is to force a column of air up-flow over a thin film or small drops of down-flow water. This procedure will oxidize iron and manganese, allow gases such as carbon dioxide, methane and hydrogen sulfide to escape and to let volatile substances such as phenol vaporize into the moving stream of air.

Because of its multi-functions, the degasifier is sometimes referred to as an aerator or a de-carbonator. The degasifier does not remove oxygen or heat water. Therefore, it is not a substitute for a boiler feed-water deaerator. This will extend the operating runs and significantly reduce the load on downstream strong base anion exchangers or de-aerators.

For volatile organic compound removal, the degasifier is efficient by itself or can be followed by granular activated carbon filters for almost complete removal. Hydrogen sulfide gas is seldom completely removed by degasification because it is readily converted to non-volatile sulfides in the degasifier. Auxiliary equipment such as a chlorinator and activated carbon filtration is required for complete hydrogen sulfide removal.

The degasifier has three main components: the tower, the blower and the sump. The tower is filled with a large surface area packing that breaks up the falling column of water into a thin film and small drops. The blower forces a stream of air upflow through the water and out through the vent pipe. The sump receives the degasified water and stores it for a few minutes before it is pumped to the point of use.

The degasifier is mechanical and needs no chemical treatment. The only operating cost is the electrical energy for the blower motor.

COMPOPLAST Degasifier System

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2.35 Lakh / PieceGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	01 Piece
Dimension	customized
Height	customized
Material	FRP
Pipe Diameter	customized
Size/Dimension	customized
Usage/Application	CO2 removal from feed water
Design Temperature	55 Deg
Size	Customized

"COMPOPLAST" Advanced Filtration Systems designs, manufactures and installs Degasifier Systems for CO2 removal in various water treatment plants. These Degasser units are customized and can be made on order depending upon the flow rate of your system. As required, we manufacture both single stage and double stage degassing plants with Degasser Towers made from FRP.

Additional Information:

Production Capacity: as per customer requirement

Delivery Time: four weeks

Packaging Details: Standard

Yes! I am interested

Compoplast FRP Degasifiers

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2 Lakh / SetGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	01 Set
Storage Capacity	05 m3 up to 360 m3
Usage/Application	Water Treatment Plats
Shape	Vertical / Cylendrical
Material	FRP
Diameter	as per our design
Height	as per our design
Body Material	FRP
Color	Blue
Max Pressure	150 mm WC
Size	customized
Design Type	our standard
Temperature	50

In water demineralisation, a degasifier, or degasser, is often used to remove dissolved carbon dioxide after cation exchange. The most common degassers are of the so-called forced draft or atmospheric type.

After cation exchange, the bicarbonate and carbonate (if any) ions are converted to carbonic acid, or carbon dioxide. CO2 is soluble in water (see graph below), but it tends to escape into the air, much as it does in a glass of Coca-Cola when you stir it. Using a degasser to remove CO2 reduces the ionic load on the strong base anion resin, and the consumption of caustic soda is thus lower.

Yes! I am interested

COMPOPLAST FRP Degasifiers System

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1.95 Lakh / SetGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	01 Set
Storage Capacity	customized
Usage/Application	Water Treatment Plats
Shape	Flat
Diameter	customized
Brand	COMPOPLAST
Design Standard	standard
Dimension	customized
Body Material	FRP
Color	Blue
Wall Thickness	customized
Max Pressure	150 mm WC
Size	customized
Design Type	forced drop

Forced Draft Degasifiers are used to remove unwanted gases from supply water. The degasifier removes the gases by passing the water over a packing media that helps the water form a thin film over the surface area of the tower. A counter current airflow is introduced at the bottom of the tower and travels up the stack through the descending flow of water. The gases are stripped as the air passes over the surface area of the water.

"COMPOPLAST" Degasifiers are used in demineralizer applications to strip CO2 following a strong acid cation exchanger or softening application. They can also be used as an economical way to strip hydrogen sulfide or volatile organic compounds (VOC).
HFT has a complete line of Forced Draft Degasifiers available.

Materials of Construction:

We have the infrastructure and the facilities of the manufacturer of FRP Degasser Towers Using Isopthalic Polyester, Bisphenol Polyester, Vinyl Ester and Epoxy Resins.

Feature:

Durable.
Weather resistant.
Easy maintenance.
Trouble-free usage.
Long-term service.
Corrosion free construction.
Simplicity of installation and setting up.
Dependable automatic controls all contribute to long.
rouble free performance.

Our Product Key Words:-

FRP Degasifiers in Chennai, FRP Degasifiers in Trichy, FRP Degasifiers in Madurai, FRP Degasifiers in Coimbatore, FRP Degasifiers in Pondicherry, FRP Degasifiers in Tamil Nadu, FRP Degasifiers in Kerala, FRP Degasifiers in Andhra Pradesh.

Yes! I am interested

Compoplast FRP Degasifier For Co2 Removal

REQUEST CALLBACK

Get Best Quote

Approx. Rs 2.85 Lakh / SetGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	01 Set
Color	any Color
Design Standard	BSEN13121
Dimension	Standard
Usage/Application	Industrial
I Deal In	New Only

Degasifier n integral part of any demineralization plant, where it is generally placed between cation and anion exchanges and removes Carbon Dioxide, which is generated by dissociation of carbonic acid at cation outlet water. In this Degassing processes, Degasifier Tower is utilized, which is made from either FRP. Low air pressure is generated at the bottom of the tower that drives out CO2 and the degassed water is collected in a sump beneath the tower.

Additional Information:

Production Capacity: as per customer requirement

Delivery Time: four weeks

Yes! I am interested

Degasifier Systems for Water Treatment Plants

REQUEST CALLBACK

Get Best Quote

Approx. Rs 3.15 Lakh / SetGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity	01 Set
Capacity (KLD/MLD)	100 KLD
Application Industry	All Industries
Inlet Flow Rate(m3/day or m3/hr)	100 m3/day
Air Blower Count	2 Blowers
Type	Waste Water Treatment
Water Source	Industrial Wastewater, Waste Water Treatment, Commercial Waste Water
Capacity Inlet Flow Rate	100 m3/hour
Treated Water Quality	as per our design
Installation Type	Prefabricated
Deliver Type	PAN India, Outside India
Automation Grade	Semi-Automatic
Brand	COMPOPLAST
Surface Finish	smooth surface for both side
Condition	New

Being the renowned names in the industry, we offer an extensive range of "COMPOPLAST" FRP Degasifier Tower that is manufactured with utmost accuracy. They are performance based and are easy to install. Our entire product range requires minimum power consumption and is delivered in different grades and dimensions.

Features: